19
Do not use.
When the access indicator is lit
In this case, the data is being read or written. Wait until the operations are
complete; then remove the card. Removing the card during access
operations will cause the data to be lost.
When the lock indicator is lit
For Macintosh computers, the lock indicator lights when the PC card is
mounted. Dragging the PC card icon and dropping it onto the trash icon
ejects the PC card, deletes the PC card icon and turns off the lock indicator
on this drive unit.
Do not remove the mounted PC card. If removed, the following message
appears on the screen. Put the card back into the slot where it was.
NOTE: For Macintosh computers, the access indicator may flash on and off even after
the eject operation. In this case, you can remove the PC card.
NOTE: Do not select the “Eject Disk” command from the “Special” menu to remove the
card.
For IBM PC/AT compatible computers, the lock indicator does not light in
normal cases. You can remove the PC card when the access indicator is not
lit.
NOTE: When you lock the PC card with the EZ-SCSI utility, the lock indicator lights. In
this case, unlock the PC card with the same utility, then make sure that the lock
indicator goes off before removing the PC card.
