S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
4
110
TimeSource 3100
TL1 Reference
097-72020-01 Issue 9: November 2003
Conventions
Uppercase letters in a command designate parameter values which must be entered as
shown. Lowercase letters in a command are the parameter name, and the specific values that
must be entered for the parameter. The Parameters section of this chapter describes the
parameters and the values where a value is the same for all parameters. Parameter values for
a particular command are listed with the command. The system accepts either uppercase,
lowercase, or a mixture of both, but upper and lower case cannot be mixed within a
parameter block.
The following symbols are used in the input and response messages:
[ ]
encloses an optional parameter
{ } encloses a group of parameters, at least one of which must be entered
|
separates alternatives in a group of parameters, at least one of which must be
entered
^
indicates a space (used in the description of the response format, but not used in the
command responses)
_
separates command code fields
:
separates parameter blocks
,
separates parameters within a block
;
terminates a command, and causes execution
" "
encloses text to be parsed by a machine
/* */ encloses comments for humans encloses a TL1 named variable
\" "\ encloses a description of a condition
...
indicates the previous line in a response may be repeated as required
Summary of Contents for TimeSource 3100
Page 1: ...TimeSource 3100 GPS Primary Reference Source 097 72020 01 Issue 9 November 2003 ...
Page 49: ...3 Chapter Installation This chapter provides the steps required for installation and power up ...
Page 109: ...Chapter 4 TL1 Reference This chapter provides information for using the TL1 language ...
Page 203: ...Chapter 6 Specifications This chapter provides equipment specifications ...