Symmetricom TimeProvider 500, User Manual

Page: 96 / 174

96 TimeProvider 500 2.0 User’s Guide 098-00172-000 Revision A – December, 2009
Chapter 4 CLI Commands
Set Commands
set user
This command sets the user name and password for the TimeProvider 500 logon. In
response to the CLI command,
set user
, TimeProvider 500 will prompt for old
(current) password, new user name, and new password.
User Name Range:
user_name
command requirements:

Must be between 4–20 characters in length.

The
user_name
is case-sensitive.

All characters must be alphanumeric (letters
a
through
z
and numbers
0
through
9
).
Password Range:

Must be between 8–32 characters in length.

All characters must be printable ASCII (ASCII decimal values 33–126), and a
comma, semicolon, and colon are never allowed.

2 characters must be non-alphabetic. For example, a number would qualify.

1 character must be non-alphanumeric (“!” would qualify)
Default User Name:
admin
Default Password:
symmadmin**
Example:
TP-500> set user
Enter old password: ************
Enter new user name: doug
Enter new password: ************
Verify new password: ************
Note : The default
user_name
and
curr_pwd
are the user name and
password shipped from the factory. Using the
set configuration
command does not return the password to the factory default value.