Symmetricom TimeProvider 500, User Manual

Page: 119 / 174

098-00172-000 Revision A – December, 2009 TimeProvider 500 2.0 User’s Guide 119
Chapter 4 CLI Commands
Show Commands
Multicast IP : (NONE)
Management GM1 : Enabled
Management GM2 : Enabled
Management NODE-MGR: Enabled
Client Clock ID : 00:B0:AE:FF:FE:01:22:D5
Domain : 0
DSCP : 0
Sync Rate : 64 pkts/s
Announce Interval : 1 s
GM1 Lease Duration : 300 s
GM2 Lease Duration : 0 s
Transport : Ethernet
show status
This command provides a summary of current TimeProvider 500 performance
status. For more details, refer to
Details for Show Status Function , on page 63.
Syntax:
TP-500> show status
Example:
TP-500> show status
Response:
Current Time : 21:51:38 11/09/2009 (UTC)
FLL state : Normal FLL [2840 min] Temperature
Reference : GM2 Avg : 41.01 C
Correction Freq : -10.12 ppb Min : 40.88 C
Phase : 0.00 ppb Max : 41.06 C
Output MDEV Estimate : 0.0002 ppb 5min : 55.37 mC
Residual Phase Error : 2377.13 ns 60min : 166.04 mC
Minimal RTD : 12.57 usec
--------------------------------------------------------------------------
Flow Direction : (GM to client) (client to GM)
GM1 (pkts/s): 0 0
GM2 (pkts/s): 64 64
Weight (%): 1.00 99.00
Transient free (/900): 900 900
Transient free (/3600): 3600 3600
Percentile Clustering(%): 99.8 99.8
Operational Min TDEV(ns): 2.7 1.8
Operational MAFE (ppb): 0.01 0.01
Min Cluster Width (ns): 100.0 100.0
Mode Width (ns): 100.0 200.0
--------------------------------------------------------------------------
Flow State : (GM1)Signaling (GM2)Normal
Clock id : (GM1)00:00:00:00:00:00:00:00 (GM2)00:B0:AE:FF:FE:01:31:65