Symmetricom TimeProvider 500, User Manual

Page: 83 / 174

098-00172-000 Revision A – December, 2009 TimeProvider 500 2.0 User’s Guide 83
Chapter 4 CLI Commands
TimeProvider 500 CLI Command Set
Example : Checks to see if the device at 192.168.1.9 is accessible. In this example,
the device is a TimeProvider 5000 IEEE 1588 grandmaster clock.
When the device is accessible:
TP-500> ping if0 192.168.1.9
Pinging 192.168.1.9 [192.168.1.9]:
Reply from 192.168.1.9: time=0ms
Reply from 192.168.1.9: time=0ms
Reply from 192.168.1.9: time=0ms
Reply from 192.168.1.9: time=0ms
When the device is not accessible:
ping 192.168.1.9
Pinging 192.168.1.9 [192.168.1.9]:
Request timed out
reboot system
This command performs a soft reboot (restart) of TimeProvider 500.
Syntax:
reboot system
Example:
TP-500> reboot system
Response :
Rebooting system
Bootcode version 1.1.1
Loading Maincode image: 0
-------------------- PTP client --------------------
TP-500 23:14:13 11/12/2009 (316)
upgrade
This command is used to upgrade the TimeProvider 500 firmware. The file for the
TimeProvider 500 firmware upgrade is accessed through an FTP server. For this
command,
upgrade is the complete path and includes the file name; FTP is the IP
address of the FTP site; and user_name is the login name of the for the FTP server.
Syntax:
Note : Domain Name Service (DNS) is not supported.