Symmetricom TimeProvider 500, User Manual

Page: 107 / 174

098-00172-000 Revision A – December, 2009 TimeProvider 500 2.0 User’s Guide 107
Chapter 4 CLI Commands
Set PTP Commands
set ptp address [ gm1 | gm2 | node_mgr ]< ip_address>
Range:
ip_address = x.x.x.x
Range for all settings = [0, 1, …, 255]
Default:
ip_address = 0.0.0.0
Example:
TP-500> set ptp address gm1 192.168.2.43
Response:
Grand Master 1 address set to 192.168.2.43
set ptp domain
This command sets the ptp domain value for TimeProvider 500.
Syntax:
set ptp domain domain_number
Range :
domain_number = [0, 1, …, 255]
Default:
domain_number = 0
Example:
Sets the domain number to 3.
set ptp domain 3
Response:
Domain set to 3
Note : The TimeProvider 500 will not attempt communications with a
device if this setting is 0.0.0.0.
Note : The
set configuration factory
command will reset the
IP address of grandmasters and the node manager to its default
value. The
set configuration default
command will not
change the current IP address settings.