Symeo LPR
®
-System
LPR
®
-2DB
Product Documentation
Commissioning
Copyright © Symeo 2012
Page 56 of 132
7.1.2
LPR-2DB Station (Mobile units)
Antennas have a free line of sight
Screwing of external antennas is correct
Antennas are labeled to allocate them to the right port of the mobile station. This is
necessary for the orientation of the vehicle.
The maximum bending radius of external antenna cables is correct
7.1.3
Formatting of coordinates
Compare the coordinate data from the surveyor with the plan coordinates of the cell plan.
7.1.4
Folders structure
The configuration files for the mobile units and the fixed mounted units are delivered in the
following directory to the customer (compare chapter 2.2):
Figure 37
The folder “mobile units”
contains the parameter for
mobile LPR unit. “Static cells”
contains the parameter for the
fixed mounted LPR station (e.g.
surveyor data). All LPR units are
labeled with their serial number
in the folder structure.
7.2 Editing of configuration files for the DSP
In the mode 1 (Basic Cell) all configuration files for the DSPs are
preconfigured and no changes of the files are allowed. In the mode 2
(Managed cell) and 3 (TDOA) the configuration file of the master
transponder has to be changed as long as no surveyor data was
available to Symeo by delivery.
If changes of a configuration for a DSP are necessary or a replacement unit is used, the
following files must be uploaded and/or modified:
File
Modification
basestation_config.txt
No modification necessary
stationXXM_config.txt
Input of Transponder coordinates (only mode 2b and 3b)
