Symeo LPR
®
-System
LPR
®
-2DB
Product Documentation
Symeo
MAP
Copyright © Symeo 2012
Page 83 of 132
8.2 Display of Symeo MAP
In Symeo MAP there is number of settings and displays for visualization.
8.2.1
Level of Transponders
The signal levels from the transponders that are being received are displayed in color
according to the following scale:
Figure 50: Color scale representing transponder levels
green: very good reception
yellow: normal reception
orange: weak reception
The following colors are also used:
gray: the transponder was not included in the measurement.
red: the transponder has been reported as faulty.
8.2.2
Radius/ Hyperboloids of Transponders
R To enable/disable the radius/ hyperboloids of the transponders press the r-key.
8.3 Antenna Calibration
The antenna calibration must only be done in mode 1 (Basic Cell) and
mode 2a, 2b (Managed Cell). In mode 3a, 3b (TDOA) this chapter can
be skipped.
If the transponder radio signals do not intersect at a point in the LPR display, the parameter
for the length of the antenna cable must be calculated and entered in the parameter file.
You will see the following display:
