Symeo LPR
®
-System
LPR
®
-2DB
Product Documentation
Commissioning
Copyright © Symeo 2012
Page 61 of 132
Data interfaces
S4
SCIA Port/ ASCII Port (ASCII protocol) and configuration
S3
A9 seriell
S2
SCIB Port (binary protocol)
S1
ARM9 seriell
Connect the serial port S4 (SCIA port) of the LPR station and the COM port of the PC via a
serial cable (<2 m).
Open the terminal program
„RealTerm“
Click in the tab “Display” on Display as
ANSI.
Choose the baud rate to 115.200
Select your COM-port
Click on Open
7.3.3
Upload DSP configuration file for LPR mobile unit (base station)
This file for the mobile station is preconfigured by delivery and needs no
changes. An Upload of the configuration file for the DSP only happens if
the mobile station must be replaced due to a defect LPR station.
Open the terminal program RealTerm as described in chapter 7.3.1 or chapter 7.3.2.
