Symeo LPR
®
-System
LPR
®
-2DB
Product Documentation
Commissioning
Copyright © Symeo 2012
Page 68 of 132
LoadPos.ini
Load position (in vehicle coordinates).
Customer.ini or
Symeo_2D.ini
Configuration of customer interface (Symeo 2D protocol)
all other files
No changes
7.4.1
fusion.ini
This file contains all connection settings and some general settings of the software
FusionEngine.
Figure 50
– fusion.ini (example)
[MeasurePath]
The path where the FusionEngine recordings (measurements) are saved.
Must only be changed if FusionEngine is running on extern PC.
[COM_LPR]
or
[COM_LPR_1]
and
[COM_LPR_2]
The physical ports (e.g. 1 for COM-Port 1) of the connected LPR-B stations.
Must only be changed if FusionEngine is running on extern PC.
[Symeo2D_Port]
The TCP listening port for the customer interface (SYMEO 2D protocol), default: port 1234.
