Symbol SE 2223, Integration Manual

Page: 98 / 260

9-3
Parameter Menus
Multipacketing
The SE 2223/3223 only supports Multipacketing Option 1.
Default Table
Table 9-2 lists the defaults for all parameters, and the page number each parameter
appears on. If you wish to change any option, scan the appropriate bar code(s).
Table 9-2. Default Table
Parameter
Parameter
Number Default
Page
Number
Set Default Parameter All Defaults 9-10
Scanning Options
Beeper Tone 91h High Frequency 9-11
LED Mode F0h 51h Decode LED Mode 9-12
Laser On Time 88h 5.0 sec 9-13
Power Mode 80h Low Power 9-14
Trigger Mode 8Ah Level 9-15
Scanning Mode 8Dh Smart Raster 9-16
Aiming Mode F0h 7Eh Disabled 9-16
Raster Height E4h 15 9-18
Raster Expansion Rate E5h 11 9-18
Time Delay to Low Power 92h 30 sec 9-19
Time-out Between Same Symbol 89h 0.6 sec 9-20
Time-out Between Different Symbols 90h 0.0 sec 9-20
Beep After Good Decode 38h Enable 9-21