Symbol SE 2223, Integration Manual

Page: 171 / 260

9-76
SE 2223/3223 Scan Engine Integration Guide
Set Lengths for Discrete 2 of 5
Parameter # L1 = 14h, L2 = 15h
Lengths for D 2 of 5 may be set for any length, one or two discrete lengths, or lengths within
a specific range. The length of a code refers to the number of characters (i.e., human
readable characters) the code contains, and includes check digits. See
Table A-6 on page
A-9 for ASCII equivalents. To set lengths via serial commands, see Setting Code Lengths
Via Serial Commands on page A-8.
One Discrete Length - This option allows you to decode only those codes containing a
selected length. For example, if you select D 2 of 5 One Discrete Length , then scan 1 , 4 ,
the only D 2 of 5 symbols decoded are those containing 14 characters. Numeric bar codes
begin on
page 9-134 . If you make an error, or wish to change your selection, scan the
Cancel bar code on page 9-136 .
D 2 of 5 - One Discrete Length
Two Discrete Lengths - This option allows you to decode only those codes containing two
selected lengths. For example, if you select D 2 of 5 Two Discrete Lengths , then scan
0 , 2 , 1 , 4 , the only D 2 of 5 symbols decoded are those containing 2 or 14 characters.
Numeric bar codes begin on page 9-134 . If you make an error, or wish to change your
selection, scan the Cancel bar code on page 9-136 .
D 2 of 5 - Two Discrete Lengths