Symbol SE 2223, Integration Manual

Page: 43 / 260

2-14
SE 2223/3223 Scan Engine Integration Guide
• Beeper and LED drivers
• 9 pin RS-232 for connection to PC workstation
• Aim and Trigger Buttons
• Beeper
• Power, Decode, Low Power Mode LEDs
• Test Points.
• Flex connector to connect the scan engine to the board
• Jumpers - Developers can:
• Use the SDK’s embedded features by placing a jumper across the desired
signal to activate the device on the board, making it accessible to the scan
engine.
• Omit the provided jumper and wire their own device into the circuit via the
unused jumper (the single row of pins), thereby using their own signals to
activate a feature (e.g., LED or beeper).
• User Documentation - the SE2223/3223 Integration Guide provides the detailed
technical specifications for the scan engine. The SSI Programmer’s Guide
provides system requirements and programming information about Symbol
Technologies’ Simple Serial Interface, which enables Symbol’s decoders (e.g., SE
2223 scan engine, hand-held scanners, 2D scanners, etc.) to communicate with a
serial host.
• Power supply - Choice of 110 or 220V.
• Cable to connect the development board to your PC workstation.
Note: If using the Cyclone pattern, be sure to mount the scan engine close to the edge of
the development board to prevent the pattern from being clipped by any portion of the
board.