Symbol SE 2223, Integration Manual

Page: 30 / 260

2-1
Chapter 2
Installation
Mechanical Interface
Physical dimensions of the SE 2223/3223 are shown in Figure 2-1 . Mounting holes for both
products are on the bottom surface of the zinc die-cast chassis. One of the three mounting
holes is in the same location as the SE 1200. SE 2223/3223 mounting holes are also
illustrated in these figures.
The SE 2223/3223 is resistant to the shock of drop for up to 2000 Gs. If the shock level is
anticipated to be above 1000 Gs, the use of shock mounts is recommended.
The SE 2223/3223 scan patterns are two-dimensional. The height of the exit window must
take into account the vertical component of the pattern. See
Table 2-9 and Table 2-10 for
window height specifications.