Symbol PTC-1800, Product Reference Manual

Page: 71 / 108

Operating the VoiceAlert application
PTC-1800 Product Reference Guide 61
Vibration alert
In the bottom right-hand corner of the Voice-Alert
screen is a Vib checkbox. Press the SK2 key to check
or uncheck this box.
Operating the VoiceAlert application
This section provides instructions for using the PTC-
1800's VoiceAlert application.
Sending a broadcast message
Follow these steps to send a VoiceAlert message to a
specific user group.
1. Press the Push-to-Talk button to activate the
VoiceAlert application. The Voice-Alert screen
displays. See Figure 16.
The available user groups have been
set up by your system administrator. 2. Press the Right arrow key to move to the Group
field and open the list of user groups.
A box near the bottom of the
VoiceAlert screen indicates when the
PTC-1800 is in “Talking” mode. 3. Press the Down arrow key until the user group
that you want to send a broadcast message to is
highlighted.
A box near the bottom of the
VoiceAlert screen indicates when the
PTC-1800 is in
Idle mode.
4. Press the Send key.
Vib box Description
þ
The PTC-1800 will vibrate to alert
you to an incoming broadcast mes-
sage.
¨
The PTC-1800 will not vibrate when
it receives an incoming broadcast
message.