5-19
Parameter Menus
Laser On Time
This parameter sets the maximum time decode processing continues during a scan attempt.
It is programmable in 0.1 second increments from 0.5 to 9.9 seconds.
Scan the bar code below to set a Laser On Time. Next scan two numeric bar codes beginning
on page
5-90
that correspond to the desired time. Time less than 1.0 second must have a
leading zero. For example, to set a Time On of .5 seconds, scan the bar code below, then
scan the “0” and “5” bar codes. If you make an error, or wish to change your selection,
scan CANCEL on page
5-92
.
LASER ON TIME
