2-3
Set Up
Disconnecting Cables
To disconnect the scanner cable:
1. Power down all the devices connected to the scanner.
2. Remove the cable by twisting the twist-lock 1/8 turn counter-clockwise and pulling
the cable out.
Setting Up the Cradle
On the bottom of the cradle are three ports. COM1 connects to the host computer, COM2
is used for daisy-chaining multiple base stations together, and the Power port supplies power
to the cradle.
Figure 2-1. Ports on the Cradle
1. Connect an appropriate power supply to the Power port on the cradle. The indicator
light on the cradle blinks, signifying successful power-up.
Figure 2-2. Power Supply Port
2. Insert the cable from the host computer into COM1 and the cable to the other base
stations, if any, into COM2. Refer to
Connecting to a Host
on page 2-5.
Power port
COM1
COM2
