3-6
Phaser Series Scanner Product Reference Guide
System Setup Options
This group of options perform basic system functions. Within this option are the Set Date,
Set Time, Set Contrast and Back To Main functions.
Set Date
Sets the date of the internal clock of the scanner. The scanner displays its current date value,
and provides a prompt for the user to enter the new date. If the current date is correct, press
the <ENTER> key to return to the system menu.
Set Time
Sets the time of the internal clock of the scanner. The scanner displays its current time value,
and provides a prompt for the user to enter the new time. If the current time is correct, press
the <ENTER> key to confirm and exit back to the system menu.
Note: If the battery is left out or uncharged for 24 hours, the user loses the
real-time clock information. If the scanner is attached to a cable and
there is no battery in the scanner, when the cable is removed from the
scanner the real-time clock information is lost.
Set Contrast
Sets the contrast of the display. The scanner displays its current contrast, and by using the up
and down arrow keys the user can change the contrast. The default contrast is 4, and the
range is from 0 to 7, with 0 being the lightest and 7 being the darkest. To cancel the change,
press the <FN><BK> keys, and to accept the change, press the <ENTER> key.
Back To Main
Returns to the main menu, starting at 0. System Setup.
App. Control
The function under this option allow you to control your application. Specifically, the Load
New System and Set Default App functions.
Load New System
Puts the scanner in download mode, and it is ready to receive a new application or an updated
version of the system software from the host computer.
