Symantec 10521148 - Network Security 7161, Implementation Manual

Page: 63 / 214

55 Installing the 7100 Series
Cabling
■
Cabling for passive mode monitoring
■
Cabling for in-line mode monitoring
■
Cabling a bypass unit for fail-open
■
Powering the 7160 on or off
Warning: To prevent a possible electric shock, do not connect the power until all
other cabling is done. An alarm will sound if you connect only one power cord.
Figure 4-5 shows the back panel of the 7160.
Figure 4-5 7160 back panel
Connecting the management, reset, and serial ports
You need four Ethernet cables of an appropriate length to connect the
management and reset ports to your network.
Use the provided serial console cable to connect the serial port to your serial
device.
To connect the management port
◆
Connect the management port on the appliance to your management
network.
1 - Power supplies
2 - Power switch
3 - USB ports
4 - Serial port
5 - Compact flash adapter
6 - Port 0
7 - Port 1
8 - Port 2
9 - Port 3
10 - Port 4
11 - Port 5
12 - Port 6
13 - Port 7
14 - RST0
15 - RST1
16 - RST2
17 - Management port