Symantec 10521148 - Network Security 7161, Implementation Manual

Page: 138 / 214

130 Monitoring and reporting events and status
Monitoring appliance status
You can access the reporting facility from the Reports menu in the Network
Security console.
To generate a report
1
In the Network Security console, click Reports .
2 Select a report type from the list.
3 In Report Parameters , enter values for Start time and End time .
4 If necessary, enter a value for Maximum number to display .
5 Click OK .
6 In Report , select a display format from the pull-down menu on the right.
7 In Report , click File to save or print the report.
8 Click File > Close to close the report.
For detailed information about report types and report scheduling, see the
Symantec Network Security Administration Guide .
Monitoring appliance status
You can monitor the status of a 7100 Series node from the LEDs, the LCD panel,
or from the Network Security console. You can monitor interface status in the
Network Security console.
This section covers the following topics:
■
Viewing status on the LEDs
■
Viewing status on the LCD screen
■
Viewing status on the Network Security console
Viewing status on the LEDs
There are five LED status indicators on the front bezel of the 7100 Series. They
indicate:
■
Power
■
Disk activity
■
Network activity (Rx)
■
Network activity (Tx)
■
Temperature