Symantec 10521148 - Network Security 7161, Implementation Manual

Page: 121 / 214

113 Configuring nodes and interfaces
Configuring appliance interfaces
About Networks tab fields
Table 8-8 provides information about the only field on the Networks tab, the
Monitored Networks field.
About Interfaces tab fields
Table 8-9 describes the only field on the Interfaces tab, the Selected Interfaces
field.
Adding or editing an interface group
The procedure for adding or editing an interface group is described below.
To add or edit an interface group
1 On the Devices tab, do one of the following:
■
Right-click on the 7100 Series node object, and click Add Interface
Group in the pop-up menu.
■
Right-click on an existing interface group object and click Edit in the
pop-up menu.
2 In Add Interface Group or Edit Interface Group , enter a descriptive name.
Expected Throughput The amount of network traffic you expect this interface group
to monitor.
TCP Reset Interface The designated reset interface to use when sending TCP resets.
Description Descriptive text up to 255 characters. The description is
displayed in the Details pane when you select the object.
Table 8-8 Networks tab field
Field Description
Monitored Networks A list of the IP addresses in CIDR format of all networks
monitored by this interface.
Table 8-9 Interfaces tab field
Field Description
Selected Interfaces A list of interfaces in the interface group, selected from a
list of all possible interfaces.
Table 8-7 Interface Group tab fields
Field Description