47
Installing the 7100 Series
Rack mounting
2
Attach the bracket by inserting four of the provided
screws through the slots
in the bracket into the holes in the appliance casing. Tighten the screws
completely.
3
Attach the other L-bracket in the same way to the opposite side of the
appliance.
4
With assistance, lift the appliance into place so that the short flanges of the
L-brackets are pressed against the rack posts.
5
Using the screws supplied with your rack, attach the L-brackets to the posts
on both sides of the appliance.
Mounting the appliance to a four-post rack
This section describes the procedure for mounting the appliance onto a
four-post rack.
Summary of Contents for 10521148 - Network Security 7161
