Symantec 10521148 - Network Security 7161, Implementation Manual

Page: 188 / 214

180 Re-imaging and unconfiguring
Re-imaging the appliance
5 Release and press the s button to select the network boot option.
At this point the Imaging Server begins to transfer files to the appliance. On the
LCD screen, you see the message:
Network Boot?
Loading
and a rotating line to indicate activity. After about a minute, the LCD screen
displays:
Building
System
which lasts a few minutes. The LCD then briefly displays:
Copying
Files
then displays:
Installing
SNS
then:
Rebooting
System
As the appliance is booting, the LCD displays:
Symantec v1.03
Diagnostics
When it is fully booted and ready for initial configuration, the LCD displays the
following, which varies according to the appliance model:
SNS7120
1. LCD Config
This is the first menu item of the LCD initial menu.
Warning: The imaging process takes between five and fifteen minutes, and must
not be interrupted.
Your appliance is now re-imaged and you may proceed with initial
configuration.
See “About initializing Symantec Network Security” on page 67.
Note: The default password for a re-imaged appliance is Symantec