General use
Page 37/52
Installation, commissioning and operating instructions
SYCLOPE
TERE’O Touch
®
CU/PT
➢
Change server address :
Press the button to open the keyboard and enter the address of the mysyclope server.
The maximum size is 30 characters.
➢
Change TCP port :
Press the button to open the numeric keypad and enter the TCP port of the mysyclope
server.
➢
Change remote code:
Press the button to open the numeric keypad and enter the new remote code
➢
Synchronize la date and timer :
When your system is connected, by ticking this box, the controller will be set
automatically by the website as soon as necessary.
➢
Ethernet configuration
➢
DHCP Active :
If the local Ethernet network on which the controller is connected has a DHCP that
automatically distributes IP addresses, you must check this box. In this case the IP, Mask and
Gateway configurations will be automatic.
➢
IP address :
Address your controller on your local Ethernet network. Press the input box to open the
numeric keypad and enter the IP provided by your IT manager.
➢
Mask & Gateway :
Same as previous.
➢
DNS Automatic :
If the local Ethernet network on which the controller is connected is automatically
distributing DNS you must check this box. In this case the DNS configurations will be automatic.
➢
Prefered DNS :
DNS server address. Press the input box to open the numeric keypad and enter the IP
provided by your IT manager.
➢
Auxillary DNS :
Same as previous.
IP
DHCP Active
DNS Automatic
IP address
Mask
Gateway
Prefered DNS
Auxillary DNS
192 168 1 2
255 255 255 0
192 168 1 200
8 8 8 8
8 8 4 4
Press the number you want to change