General use
Page 36/52
Installation, commissioning and operating instructions
SYCLOPE
TERE’O Touch
®
CU/PT
➢
Change MODBUS parity :
Use the buttons on either side of the selection box to scroll through the different
parities in one direction or the other (None, Even, Odd).
➢
Stop bit(s) information :
This part is not modifiable and is automatically configured according to the choice of
parity that is made.
-
2 for a communication without parity.
-
1 for communication with even or odd parity.
➢
Change MODBUS address :
Press the button to open the numeric keypad and enter the new address.
Section MODEM (Communication avec site web mysyclope)
➢
Change Modem type :
Use the buttons on either side of the selection area to scroll through the different
parities (NO, GSM, Ethernet, WIFI) in one direction or the other.
Depending on the type of modem selected, the shaded areas below become accessible
in configuration.
➢
Change SIM card APN in GSM mode :
Press the button to open the keypad and enter the APN corresponding to your m2m
GSM card provider. The maximum size is 30 characters.
➢
MYSYCLOPE configuration
MODEM
Type
APN SIM card GSM module
GSM
Mysyclope setting
IP setting
WIFI setting
m2minternet
MODEM
Type
APN SIM card GSM module
Ethernet
Mysyclope setting
IP setting
WIFI setting
MODEM
Type
APN SIM card GSM module
WIFI
Mysyclope setting
IP setting
WIFI setting
Mysyclope
www.mysyclope.com
18880
1234
Synchronize the date and time
Server address
TCP port
Remote code