SXblue Series User Manual
72
The
Position
tab (first tab) shows the status of the SXblue receiver.
Default SBAS
solution should be use as input differential correction source or DGPS
RadioBeacon (SXblue II-B). The
Diff Requested
can be change at the
RX Config
tab.
The
Satellites
tab shows the tracking status of the SXblue receiver. See illustration
next page.
GPS data messages such as NMEA 0183, binary, and RTCM SC-104 can be
configure with the following tab:
-
BT [PORTA]
for Bluetooth communication
-
SERIAL [PORTB]
for serial port RS232
-
USB [THIS]
for USB communication actually connected
Note:
Tab and Com Port
associated are different when SXblue 12/24 volt and
Platinum AG are connected with
SXblue Config
application since these unit don’t
use USB.
From the
RX Config
tab, you can change the
Diff Source
such as RTCM
correction from external UHF radio connected to Serial Port B. See illustration next
page.
Summary of Contents for iSXblue II+ GNSSTM
Page 1: ...USER MANUAL WWW SXBLUEGPS COM...
Page 74: ...SXblue Series User Manual 73...
Page 84: ...SXblue Series User Manual 83 Appendices...
Page 107: ...WWW SXBLUEGPS COM...