SXblue Series User Manual
74
From
Log – Messages
tab, it is possible to log RAW data for post processing.
3.2.2 Activating an Option
These instructions explain how to activate an option on SXblue receiver. The
subscription code must be purchased from SXblue GPS or an authorized
representative.
Example of available option for SXblue receiver:
- 10 and 20 Hz Output Rate options
- Multi-GNSS activation
- Multi-Frequency activation
- RTK activation
- L-band activation and subscription
Some information are needed from the SXblue unit in order to proceed to the
purchase.
Select the
Terminal
tab from the application.
Terminal
shows results of command
sent to the receiver. Send the following command (see illustration below):
$JI
Summary of Contents for iSXblue II+ GNSSTM
Page 1: ...USER MANUAL WWW SXBLUEGPS COM...
Page 74: ...SXblue Series User Manual 73...
Page 84: ...SXblue Series User Manual 83 Appendices...
Page 107: ...WWW SXBLUEGPS COM...