SX BLUE GPS iSXblue II+ GNSSTM, User Manual

Page: 46 / 107

SXblue Series User Manual 45
1.4.6 Available Software and Utilities
This section gives a brief overview of the various software and utilities available
for the SXblue receiver. Throughout this manual, various menus of some of the
utilities are presented to help configure and monitor the receivers for specific
applications.
All software and utilities are free (with the exception of the SXblue Server, the
SXblue GPS EZSurv post-processing software, SXblue GPS FielGenius and ESRI
Collector) and can be downloaded from the
www.sxbluegps.com or www.esri.com
web site. The SXblue Server features a trial mode with full functionality but with a
limitation of one hour per execution. Please contact your SXblue representative for
more information on how to purchase these products.
1.4.6.1 SXblue Config
SXblue Config is a free utility to configure and monitor the SXblue
receiver. It also allows logging NMEA messages and raw data. Available
for Windows 2000/XP/7/8/10 (32-bit and 64-bit) and for Windows Mobile
6.x.
1.4.6.2 SXblue RTN
When your field software does not feature a built-in NTrip and/or DIP
client, SXblue RTN is a
free utility that allows the SXblue receiver to
use RTK/DGPS Internet corrections from a network. It uses only one
communication port with the SXblue receiver to both send the
corrections and receive the NMEA messages. A virtual COM port is created on
your computer to allow your software to receive RTK corrected positions. Available
for Windows 2000/XP/7/8/10 (32-bit and 64-bit) , for Windows Mobile 6.x, and iOS.
1.4.6.3 SXblue Server
SXblue Server is a TCP Direct IP server with NTrip emulation to set your
base station on the Internet. Besides being used as a stand-alone
server, it is capable of linking to an NTrip Caster as a mountpoint. It also
features a mirror mode to allow a base station to be carried in the field.
Available for Windows XP/7/8/10, 32-bit and 64-bit.
1.4.6.4 SXblue Mirror
SXblue Mirror is a free utility that allows an SXblue base station to be
installed in the field and use the Mirror mode of the SXblue Server to
allow a DIP connection from an SXblue rover. As there are many free
applications available on the Internet for Windows, this utility was only
designed to support Windows Mobile 6.x..