SX BLUE GPS iSXblue II+ GNSSTM, User Manual

Page: 2 / 107

Copyright Notice

Copyright 2017 SXblue GPS inc. All rights reserved. No part of this manual may be
stored in a retrieval system, transmitted, or reproduced by any means, including, but not
limited to photocopy, photograph, digitizing, or otherwise, without the prior written
permission from SXblue GPS inc.
Trademarks
The SXblue GPS logo, SXblue GPS™, SXblue GNSS
TM
, SXblue L1/L2 GNSS
TM
, SXblue
II+ GPS™, iSXblue II+ GPS
TM
, SXblue II-B GPS™, SXblue II-L GPS™, SXblue II+
GNSS
TM
, iSXblue II+ GNSS
TM
, SXblue III+ GNSS™, iSXblue III+ GNSS™, SXblue III-L
GNSS™, SXblue Platinum
TM
and SXblue Platinum AG
TM
are trademarks of SXblue GPS
inc. The Bluetooth™ trademarks are owned by Bluetooth SIG Inc., USA. All other
trademarks are the property of their respective owners.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.