Swissvoice Eurit 535, User Manual, Page: 88 / 102

203245631en_ba_b0
84
Symptom Cause Remedy
No display. Handset not switched on. Press connect key.
Batteries discharged or Charge handset / batteries.
inserted incorrectly. See pages 14, 15.
No radio link to the Handset not logged on. Log handset on. See page 52.
base station.
Cannot get a line, Telephone connectors not Check connectors at both the
no dial tone. properly inserted. telephone socket and the
eingesteckt. base station; if necessary dis-
connect and reconnect, p. 12.
Connectors of the AC Check the connector at the
adaptor not properly base station and the 230V
inserted. mains plug at the socket.
If necessary remove and
reconnect, p. 12.
Handset and/or base Ringer de-activated or Adjust ringer volume.
station not ringing. volume set too low. See pp. 57, 60, 61.
No MSN allocated to the Allocate MSN to the handset.
handset. See p. 23.
On PBXs only: Exchange identification Enter exchange identification
no connection or wrong code not entered. code. See p. 62.
number when dialling
from speed-dial memory.
Handset not ringing Ringer is switched off. Switch ringer on, p. 57.
when an external call Volume is on minimum. Adjust volume, p. 60.
arrives. Babyphone is switched on. Switch babyphone off, p. 63.
No MSN allocated to Allocate MSN to the handset,
the handset. p. 23.
General information
Troubleshooting
Most malfunctions will not be the result of a defect in your telephone. You can often
correct minor faults yourself by briefly interrupting the power supply to the base station
(switching off/on the plug-in power supply) or by removing the batteries of the handset
and inserting them again.
The following tips are intended to help you do this.