Swissvoice Eurit 535, User Manual, Page: 56 / 102

203245631en_ba_b0
52
Using several handsets
The telephone allows you to operate up to
6 handsets on one base station.
You can make two internal calls between
two handsets and at the same time
somebody can also make an external call.
Each additional handset must be logged
onto the base station and allocated an
internal number. Each internal subscriber
number (1-6) can only be allocated once.
It is shown on the handset display in
standby state.
Note:
If during operation with several handsets
two of the handsets have already seized
the external line, the busy tone sounds in
the third handset. You can still make
internal calls. Each handset can be logged
on at up to 4 base stations (A–D).
Logging a handset on
Preparing the base station for log on
t
Press the internal key at the base
station for five seconds.
The connection indicator on the
base station (red light 1) starts
flashing and a signal tone sounds.
For 60 seconds the base station is
now ready to enable you to log
onto a handset.
If the base station has been prepared, you
can log the handset onto the base station:
1. Key in the base station PIN or
"0000" (default setting).
2. Press
OK
.
3. Key in the new internal call number
(1–6) for the handset.
4. Press
OK
.
5. Determine the designation of the
base station (A–D).
6. Press
OK
.
7. Press
YES
.
If log on was successful, the respective letter
(A–D) appears on the base station display.
Note:
If the internal call number is seized a second
time, the handset first logged onto it is
logged off.
If the logging-on process failed, a question
mark appears on the display.
In order to log a handset on you need to
be within range of the base station.
BaseStat. setting
Log on
On base station