Swissvoice Eurit 535, User Manual, Page: 74 / 102

203245631en_ba_b0
70
Setting the language of the
standard message (plug & play)
You can set the programmed message in a
language of your choice:
1. Select "Language gr. msg".
2. Press
OK
.
3. Select the desired language.
4. Press
X
.
Time-over message
You can record a time-over message (e.g.
"Thank you for calling") and switch it on
or off. If it is on, it will be played after expiry
of the time limit set for a message.
1. Select "Time-over msg.".
2. Press
OK
.
3. Select "Time-over msg. 1-5" or
"None".
4. Press
X
.
Setting the answering machine
Answer. machine
Greeting msgs.
Y
Time-over msg. 1-5
Time-over msg.
Y
None
Record messages
1. Select "Message 1-5" or "Standard
msg.".
2. Press
X
.
The set outgoing message is
played.
Answer only
1. Select "Info msg. 1-5".
2. Press
X
.
The information message is played.
Off
It is advantageous not to switch off the
entire answering machine via the base
station, but if required, only to switch it off
for one or several MSNs.
To do so, switch the outgoing message text
of the desired MSN to "Off" using the
handset.
To switch it on, again select an (outgoing)
message or an information message.
1. Select "Off".
2. Press
X
.
Note:
When the memory is full, the answering
machine automatically switches itself off
and "Answ. mach. full" appears in the
display.
In "Recording" mode (Message 1-5 or
Standard msg.) the time-over message, if
recorded and switched on, is played after
a set period.
If no (outgoing) message or information
message has been recorded, it is not
available for selection.
Anrufbeantworter
Einstellungen
Sprache Ansage
Y
Deutsch
...