Swissvoice Eurit 535, User Manual, Page: 65 / 102

203245631en_ba_b0
61
Base station settings
Base station ringer
You can select the volume and the melody.
1. Select "Volume" or "Melody" or
"Increasing".
2. Press
OK
.
3.
≤
,
≥
Select your setting.
4. Press
OK
.
Note:
If the procedure is terminated with the
connect key or the cancel key, the old
setting is retained.
Please note that full volume may damage
your hearing.
Time and date
When you first operate the telephone or
after a power failure, date and time will
not be correct. After the first outgoing call,
date and time will be updated by the
network. However, you can also set them
manually:
BaseStat. setting
Base st. ringer
Volume
Melody
Increasing
Volume
OK
≤ ≥
1. Enter the time (e.g. 18:54).
2. Enter date (DD.MM.YY).
Identification restriction (CLIR)
See the section "Comfort through ISDN –
Identification restriction"
Base station PIN
(personal identification number)
The base station PIN (personal identification
number) is required if you want to protect
individual user options from unauthorised
access, (e.g. logging off handset, enter call
allocation).
In the
default setting (factory setting) the
base station PIN is off ("0000").
1. Select "Base station PIN".
2. Press
OK
.
3. Enter 4-digit PIN.
4. Press
OK
.
5. Repeat 4-digit PIN.
The base station PIN is activated.
Note:
Please remember your base station PIN,
otherwise the services of your dealer will
be required at your expense.
BaseStat. setting
Base station PIN
BaseStat. setting
Time and date