Swisscom Top A47 ISDN, Operating Instructions Manual

Page: 37 / 110

33
20322071en_ba_a0
Telephoning
Incoming calls
If you have not entered a Multiple Subscriber Number (MSN) i.e. no user is programmed, your
telephone will ring for every incoming call to any of your MSNs.
If several users have been defined and each assigned an MSN, you can program an individual
ringing tone for each user. This allows you to determine the person being called.
The Swisscom ISDN network supports the CLIP function. This enables the caller’s number to be
displayed on your telephone. If the number is stored in the phonebook, the caller’s name is au-
tomatically displayed.
The second line shows the user for whom the call is intended (A, B, C, D or E).
Call acceptance
Lift the handset and make your call.
Or…
Press the loudspeaker button to activate speakerphone mode. Everyone in the
room can listen in and talk to the person being called.
Or…
accept Press the softkey under »accept«. Conduct your call over the loudspeaker and
built-in microphone. Everyone in the room can listen in and talk to the person
being called.
To terminate the call, replace the handset if you have been speaking off-hook, or for
speakerphone mode press the loudspeaker or the softkey under »terminate«.
Reject call
If you do not wish to talk to the caller on the display, you can reject the call.
The display shows the caller’s number/name. Press the softkey repeatedly under
» « until the display shows »reject, forward, «.
reject
Press the softkey under »reject«. The call is cleared. The caller’s number is
stored in the relevant user’s caller list.