manualshive.com logo in svg

Swisscom Top A47 ISDN, Operating Instructions Manual

Share
Download
Swisscom Top A47 ISDN Operating Instructions Manual Download Page 75

71

20322071en_ba_a0

Short Message Service (SMS)

Create, send or save SMS

Select the user.

Press the menu button until »Functions« is displayed.

Press the softkey repeatedly under »

«. »Messages (SMS)« appears in the

display.

change

Press the softkey under »change«.

Press the softkey under »

«. »SMS« appears in the display.

send

Press the softkey under »send«.

To send the SMS to a mobile phone or an ISDN phone which supports SMS:

Write your message.

ok

Press the softkey under »ok«. »No.:_« appears in the display.

Enter the number with area code or, if the number is in your phonebook, press
the softkey under »

«.

Keep pressing the softkey under »

, 

« until you find the number.

ok

Press the softkey under »ok«.

ok

Press the softkey again under »ok«. The SMS is sent.

Or…

To save the SMS for sending at a later stage:

save

Press the softkey under »save«. The SMS is saved.

…Continue

To exit the menu, hold down the EXIT button.

➭

The last-written message appears in the entry field ready for re-sending.

Summary of Contents for Top A47 ISDN















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands