Swisscom Top A47 ISDN, Operating Instructions Manual

Page: 30 / 110

26
20322071en_ba_a0
change Press the softkey under »change«. The display again shows »1: no entry« (if no
provider is set) or »1: xxx (yyy)«, where xxx corresponds to the provider name
and yyy to the provider code.
Press the softkey under » « until the desired provider appears (a consecutive
number is shown in front of the name).
change
Press the softkey under »change«. »Name:« and the cursor are shown.
You can now enter or change the provider name. If you delete the entire name,
the entry is removed from the list.
ok
Press »ok« to confirm. »No.:« and the cursor are shown.
Enter the provider’s code.
ok
Press »ok« to confirm.
To enter more providers (2,3,4,5,6), repeat the above procedure.
Automatic provider selection
You can program the phone to route all outgoing calls with this prefix through a specific pro-
vider (e.g. prefix »0« for long distance, »00« for abroad, »0033« for France, etc.). If no prefix is
entered, all calls not otherwise defined are made through this provider.
Press the menu button repeatedly until the display shows »Installation«.
Press the softkey repeatedly under » « until the display shows »Provider«.
change Press the softkey under »change«. The display shows »Provider list«.
Press the softkey under » «. The display shows »Auto. provider choice«.
change
Press the softkey under »change«. The display again shows »1: no entry« (if no
provider is set) or »1: xxx (yyy)«, where xxx corresponds to the provider name
and yyy to the provider code.
Press the softkey repeatedly under » « until the display shows the entry.
change
Press the softkey under »change«. »No.:« and the cursor are shown.
You can now enter or edit the prefix. If no prefix is entered, all calls not other-
wise defined are routed through this provider.
ok Press »ok« to confirm. The display shows either »Provider: no provider« (if no
provider has yet been assigned) or »Provider: xxx«, where xxx corresponds to
the provider name.
Press the softkey under » « or » « until the display shows the provider via
which calls with the preset area code are to be routed.
ok
Press »ok« to confirm.
Telephoning