Fitted equipment
67
- contact the Customer Service
department of Thetford.
• You suspect a leak in the cooling system:
- switch off the refrigerator;
- extinguish any naked flames;
- provide sufficient ventilation;
- contact the Customer Service
department of Thetford.
about your refrigerator
Your refrigerator has a cold space and a freezer
compartment. After starting up the refrigerator,
allow it to cool for at least eight hours before
placing any food in it.
cold space
The cooling fins are located on the inside of
your refrigerator. The absorption system uses
the cooling fins to withdraw heat from the
refrigerator. Therefore, never place plastic or
paper over the cooling fins. Air must be able to
circulate freely through the refrigerator so that
heat can be extracted.
Important! Do not cover the cooling fins at the
back of the refrigerator with plastic or paper.
The refrigerator cools optimally when air is
allowed to move freely through the refrigerator.
• To limit frosting on the cooling fins:
- always cover liquid foods before
placing them in the refrigerator;
- always let hot food cool before placing
it in the refrigerator;
- never keep the refrigerator open longer
than necessary.
Fitting racks
Inside your refrigerator there are two or three
storage racks. You can adjust the racks to a
convenient height by means of a simple
click system:
• click the plastic bracket to the right short
side of the rack;
• turn the bracket into the horizontal position
and insert the rack tipped in a sloping
position into the refrigerator;
• place the short side without bracket
into one of the grooves on the left wall
of the refrigerator;
• place the short side with bracket in the
corresponding groove on the right wall of
the refrigerator;
• turn the bracket downwards to fix it into
the groove.
To move a rack, turn the bracket upwards and
remove the rack. Place the rack at the required
height in the way described above.
securing products for driving
The fitting racks in your refrigerator have
a system for you to secure products while
driving. The system consists of a simple click-
and-slide plastic strip. To secure products on
the rack while driving, push the plastic strip as
tightly as you can against the products on the
rack. In the storage space on the inside of the
refrigerator door, there are two unique Thetford
bottle slides (see illustration) The slides prevent
bottles from sliding around during driving. Push
the slide against the products in the door or
place the products between the bottle slide .
Freezer compartment
Important!
- The freezer compartment is unsuitable as
a means of freezing food, the freezer will
maintain the temperature of already
frozen food
- Use only drinking water to make ice cubes.
- Do not place any other products in the
freezer compartment when you are making
ice cubes.
