21
10. TROUBLESHOOTING:
RISK OF ELECTRIC SHOCK! DISCONNECT FROM MAINS BEFORE
OPENING THE MACHINE!
SOME INTERNAL PARTS MAY BE EXTREMELY HOT !
•
MACHINE DOES NOT START UP WHEN CONNECTED TO A POWER SOCKET:
Q:
Does the “standby” indicator illuminate red?
YES:
Press and HOLD the “OK” button until the machine is on, and the display illuminates.
NO:
Check the power socket and / or its fusing. The machine consumes 2,600 Watts (11
Amps) with no fan connected. With a fan (max power 500 W), the total consumption is 3,100
Watts (13,5 Amps).
•
OUTPUT IS SET TO 100%, BUT THE MACHINE RESPONDS VERY SLOWLY
This is normal. The Soft start system will start at only 20%, and fade the output up to 100%
during 6,4 seconds. This will avoid “crack” noise and reduce high peak loads on internal
compenents.
•
THE EXTERNAL FAN DOES NOT WORK
Q:
Check the fan fuse. Is the fuse OK?
YES:
Check the fan and the connection. See chapter 6 for proper wiring.
NO:
There is always a reason why the fuse is blown. Check the fan and the connection
cables. Incorrect fan cable wiring may cause serious personal injury.
•
THE MACHINE DOES NOT RESPOND TO DMX.
First, check for proper DMX cable wiring and that the correct DMX address is set. If the
machine still does not work, restart the machine:
1. Switch the machine off: Press the MODE button until “Switch off?” appears. Press OK.
Unplug the machine from mains for approx. 30 seconds.
2. Re-plug the machine, if it does not start up automatically: Press and HOLD the “OK”
button until the machine is on, and the display illuminates.
3. Check if the machine responds to the DMX signal
WARNING
