10
XLR & DIN connectors
XLR & DIN connectors
Support handle
Mains cable
Fan fuse
Fan connector
6.
If the machine is to be used with DMX: Connect a 5-pin DMX cable to the male (=input)
XLR connector. See below for further instructions.
6. Fog capacity:
•
In all modes, the T26 can produce fog until the temperature is below the minimum
operational level. Below this point, the pumps are unable to run.
•
The machine can produce smoke continous (without interrups for re-heating) at output levels
below 50%. If the machine is to be used for continous operation, make sure the maximum
heater temperature is reached before the operation starts.
•
At output levels between 50% and 80%, the machine can produce smoke for several minutes
without interrups for re-heating.
•
At output levels more than 80%, the machine can produce fog for 60 – 120 seconds until the
temperature is below the minimum operational level.