15
3.
The fog output and fan speed is proportional to the DMX level:
Output %
DMX level
▌
Output %
DMX level
▌
Output %
DMX level
▌
▌
1 4
▌
35
90
▌
70
179
5 14
▌
40
102
▌
75
191
10 26
▌
45
115
▌
80
204
15 39
▌
50
129
▌
85
217
20 51
▌
55
140
▌
90
230
25 64
▌
60
153
▌
95
242
30 77
▌
65
166
▌
100
255
3. DAISY-CHAIN MULTIPLE FIXTURES:
Use a standard DMX cable, with one male and one female 5-pin connector. Use the male plug
for connection to the DMX out (female) connector on the machine. Plug the other end
(female connector) of this cable to the next unit in the series. Repeat this step with each
successive unit in the chain (connect unit 2 to 3, unit 3 to 4 etc), until all units are connected.
Daisy-chain rule:
You need one DMX cable for each unit you want to connect in the daisy-
chain.
DMX light desk
DMX out
Swefog Live T26 or
other DMX fixture
IN DMX OUT
Swefog Live T26 or
other DMX fixture
IN DMX OUT
Swefog Live T26 or
other DMX fixture
IN DMX OUT
1
2
..n
8.2.2. Manual mode (stand-alone):
Select manual mode if you wish to operate the machine from its keypad only.
Op mode MANUAL
>P 0% FAN 0%
1.
Set fog output level (P) and fan speed (Fan): Use the
▲
/
▼
buttons to set an output level
from 0 to 100%. Press and hold for faster count. Use the
◄
/
►
buttons to change between
smoke output and fan speed. An arrow indicates whether the smoke output ( >P ) or the fan
speed ( >Fan ) is set.
2.
Press OK button for start the production of fog. The RED “smoke on” indicator illuminates.
NOTE: The soft start system always starts the machine at 20% fog output. After a few
seconds the machine will produce fog at selected level.
3.
Press OK button for stop fog production.
In manual mode, the fog production is automatically disabled if the machine stop for re-
heating. After an interrupt, the user need to press the “OK” button for continue the fog
production. This is a safety feature to prevent from uncontrolled fog production.
