swaploader SL-2418, Parts And Operation Manual

Page: 32 / 116

SL-2418.INS
2-14
04/2020
HYDRAULIC TANK INSTALLATION
1.
Select a location to mount the hydraulic tank. Reference Figure E or Drawing No. 90H64
for the suggested location of the hydraulic tank on the right-hand side of the truck. The
hydraulic hoses have been sized for the tank to be mounted in this general area. The tank
can be located on the right-hand side or behind the cab, if necessary, which means longer
hoses may be required.
2.
Drill four (4) holes for 5/8-inch diameter bolts (provided) in the mount angle of the
hydraulic tank (two per angle) and the frame rails of the truck chassis. Mount the
hydraulic tank and install the hydraulic filter. Install the hydraulic return hose and the
hose barb fitting between the filter and the control valve assembly as shown on Drawing
No. 91H01. The hose length can be shortened if necessary. Secure the hose to the barb
fittings with the hose clamps provided.
Figure E