swaploader SL-2418, Parts And Operation Manual, Page: 55 / 116

10/02/09
FENDER ASSEMBLY, SINGLE AXLE
Aluminum (10H93) / Steel (11H13)
INSTALLATION INSTRUCTIONS
1. Review all directions and diagrams provided before starting
fender installation.
2. Center fender above tire using block to maintain the proper
height. Fender should be approximately 5” above tire to
allow for suspension movement (See Fig. 1). A maximum
width of 48” from center of the truck to the outside edge of
the fender should be maintained (See Fig. 2).
3. Place fender bracket weldements [Part No. 10H74] on fender.
Position the brackets to avoid any mounting obstacles on
hoist and/or truck chassis.
FIG. 1 FIG. 2
Approximately 5” 48” MAX
HOIST
MAINFRAME
(REF)
TRUCK FRAME
(REF)
TIRE
(REF)
TRUCK
(Diamond Plate Only)
All Figures are for Illustration Purposes Only