swaploader SL-2418, Parts And Operation Manual

Page: 29 / 116

SL-2418.INS
2-11
04/2020
CONTROLS INSTALLATION - AIR SHIFT (OPTION)
1. Attach the valve mount bracket (Pt. No. 10H51) to the mainframe as indicated on
Drawing No. 90H61 with the fasteners provided.
2.
Mount the hydraulic control valve assembly (Pt. No. 20P39) to the valve mount bracket
as shown on Drawing No. 90H61 with the fasteners provided. Attach air shift kits (Pt.
No. 20P95) to the hydraulic control valve. Reference installation instructions included
with the air shift kits.
3.
Install the hydraulic adapters and connect the hydraulic tubing (Pt. Nos. 11P36, and
11P37) and the hydraulic hose assemblies (Pt. No. 11P25) to the control valve assembly
as indicated on Drawing No. 91H01. The tubing should be supported by the clamp
assemblies that are provided in the Loose Parts Box (See Drawing 52H35).
4.
Determine the best location in the cab for the control handle assembly (Pt. No. 20P72).
The location should be such that the controls can be easily reached while operating the
truck. A control handle console (Pt. No. 51H27) is provided to facilitate the mounting of
the control handles (See diagram below).
5.
Install the air fittings and hose as shown on Drawing No. 90H60 (Air Circuit, Control
Valve). An air pressure protection valve (Pt. No. 20P74) is provided so you can tap into
the truck's air supply without jeopardizing the integrity of the air system. The air hose is
provided in a bulk length, which you can cut to length as required for running the air
lines. Take care in routing the air lines and avoid hot areas such as exhaust pipes, etc.