swaploader SL-2418, Parts And Operation Manual

Page: 84 / 116

SL-2418.MAI
4-10
04/2020
ADJUSTMENT
Should the jib lockout valve need adjustment the first step will be to loosen the mount bracket
screws (see illustration above). Reposition the jib lockout valve with respect to the valve ramp
by turning the adjustment screw on the valve mount bracket as follows:
Clockwise Adjustment – Moves the jib lockout valve closer to the valve ramp
Counter-Clockwise Adjustment – Moves the jib lockout valve away from the valve ramp
Once the valve has been moved back into proper adjustment, then tighten up the mount bracket
screws.
PART NUMBER & SPECIFICATION
SwapLoader
Pt. No.
Work Port Size Spool Type
Pressure
(Maximum)
Flow Rate
(Maximum)
21P28 3/4-16 ORB (SAE 8) 2-Way, 2-Position N.C. 4,600 PSI (Nominal) 16 GPM (Nominal)
Please contact your SwapLoader Distributor or SwapLoader USA should you have any
questions regarding this procedure.
SIDE VIEW
Mainframe
(Ref)
Mainframe
(Ref)
Pivot Joint
(Ref)
Mount Bracket
Screw (2-Typ)
Valve Ramp
Valve Ramp
Jib Lockout
Valve
Valve
Mount Bracket
Screw (2-Typ)
Adjustment Screw
Valve Mount
Base
1/8" to 3/16" of
Roller Exposed
JIB LOCKOUT VALVE ADJUSTMENT ILLUSTRATION
TOP VIEW
Valve Mount
Bracket
Valve Mount
Bracket
Side
View
Side
View