swaploader SL-240, Parts And Operation Manual

Page: 59 / 140

Figure 3
Additional Notes:
1. Prior to any welding, consult the
truck manufacturer for any special
precautions that may need to be
taken. Typically the batteries must be
disconnected and the ground lead
from the welder should be connected
as close as possible to the part being
welded to avoid the possibility of
arcing across bearings, gears, etc.
2. During installation of the bumper,
check to make sure that the position
of the bumper does not interfere with
the loading and unloading of truck
bodies.
MATERIAL LIST
ITEM QTY P/N DESCRIPTION
WT lb
PER EA.
1 1 51H12 LONG PIVOT ARM R.H 16.08
2 1 51H13 LONG PIVOT ARM L.H. 16.08
3 1 51H14 SHORT PIVOT ARM R.H. 8.89
4 1 51H15 SHORT PIVOT ARM L.H. 8.89
5 1 51H16 BUMPER TUBE 113.05
6 2 51H17 MOUNT BRACKET 19.94
7 4 51H18 BUMPER PIN 1.12
8 2 51H19 BUMPER CRADLE 1.64
9 2 51H20 BUMPER ROLLER 27.07
10 6 01P06 3/4-10 SLOTTED HEX NUT .22
11 6 00786 Ø3/4 FLAT WASHER HT .10
12 6 00P98 Ø5/32 x 1 1/2 COTTER PIN .01
13 4 00P03 3/8-16 x 3/4 HHCS .11
14 4 00755 Ø3/8 LOCK WASHER .05
15 10 90P20 1/4-8 GREASE ZERK .01
16 2 90P03 1-1/8 O.D. x 10 SPRING .60
TOTAL 288.69