swaploader SL-240, Parts And Operation Manual

Page: 20 / 140

SL-240.INS
2-2
05/2020
HOIST INSTALLATION TO TRUCK CHASSIS
1.
Place the SL-105 hoist assembly on the truck chassis. The truck chassis mounting
surface should be flat without any steps or protrusions. If necessary shim bars need to be
added to ensure a flat surface on which to support hoist. The truck chassis should meet
the following minimum specifications (See Figures A & B):
RBM for each channel: 900,000 in.-lb.
Total RBM: 1,800,000 in.-lb.
Minimum clear frame rail for mounting: 182" (See Fig. A)
Front Axle Cap: 12,000 lb. (Min)
Total Rear Axle Capacity: 20,000 lb. (Min)
CA Dim: 130” to 144” (144” preferred)
CT Dim: 120” to 132” (132” preferred)
Figure A