42
A-96.250.341 / 061015
AMI Powercon
Operation
5.4.
Changing Parameters and values
Changing
parameters
The following example shows how to set the Q-Flow sensor:
Changing
values
1
Select the parameter you want to
change.
2
Press <Enter>
3
Press [
] or [
] key to
highlight the required parameter.
4
Press <Enter> to confirm the se-
lection or <Exit> to keep the previ-
ous parameter).
The selected parameter is
indicated (but not saved yet).
5
Press <Exit>.
Yes is highlighted.
6
Press <Enter> to save the new pa-
rameter.
The system reboots, the new
parameter is set.
5.1.1
Sensors
Flow
None
Sensor parameters
Quality Assurance
Temp. Compensation
Sensor parameters
Quality Assurance
Temp. Compensation
5.1.1
Sensors
Flow
None
Flow
None
Q-Flow
5.1.1
Sensors
Flow
Q-Flow
Sensor parameters
Quality Assurance
Temp. Compensation
Sensor parameters
Quality Assurance
Temp. Compensation
5.1.1
Sensors
Flow
Q-Flow
No
Save ?
Yes
1
Select the value you want to
change.
2
Press <Enter>.
3
Set required value with [
] or
[
] key.
4
Press <Enter> to confirm the new
value.
5
Press <Exit>.
Yes is highlighted.
6
Press <Enter> to save the new val-
ue.
5.3.1.1.1
Alarm High
300mS
Alarm Conductivity
Alarm Low
0.000
S
Hysteresis
1.00
S
Delay
5 Sec
5.3.1.1.1
Alarm Conductivity
Alarm Low
0.000
S
Hysteresis
1.00
S
Delay
5 Sec
Alarm High
120 mS
