34
A-96.250.341 / 061015
AMI Powercon
Installation
3.8.
Signal Outputs
3.8.1
Signal Output 1 and 2 (current outputs)
Note:
Max. burden 510
If signals are sent to two different receivers, use signal isolator
(loop isolator).
Signal output 1: Terminals 14 (+) and 13 (-)
Signal output 2: Terminals 15 (+) and 13 (-)
For programming see
, Menu Installation
3.8.2
Signal Output 3 (optional)
Requires the additional board for the third signal output 0/4–20 mA
PCB
Note:
Max. burden 510
.
The third signal output is installed in the upper holder on the main
board. You can operate either 3. signal output or communication in-
terface, not both!
Terminal 38 (+) and 37 (-).
.
A
Third signal output 0/4 - 20 mA PCB installed on main board
A
