Suzuki VZR1800 2007, Service Manual

Page: 148 / 609

ENGINE 3-91
FRONT CAM DRIVE IDLE GEAR/SPROCKET
• Turn the crankshaft counterclockwise with the box wrench
and align “R I T” line
A
on the crankshaft with the index
marks
B
of the upper crankcase hole.
"
• Install the front cam chain tensioner No. 1 assy
1
.
• Apply a small quantity of THREAD LOCK SUPER to the bolt
and tighten its to the specified torque.
*
99000-32030: THREAD LOCK SUPER “1303”
or equivalent
#
Front chain tensioner No. 1 bolt:
18 N·m (1.8 kgf-m, 13.0 lb-ft)
• Engage the cam chain No. 1 onto the cam drive idler sprocket
and install it to the upper crankcase.
• Align the groove
A
on the cam idler sprocket with the
embossed line
B
on the upper crankcase. (
!
3-94)
• Apply SUZUKI MOLY PASTE to the idler shaft
2
and install
the idler shaft.
(
MOLYBDENUM OIL SOLUTION
To adjust the camshaft timing correctly, be sure to
align “R I T” line
A
with the index marks
B
and hold
this position when installing the cam drive idle
gears/sprockets, front and rear.
T
R