Suzuki VZR1800 2007, Service Manual

Page: 400 / 609

CHASSIS 9-43
• Remove the swingarm pivot bearings
1
with the special
tools.
%
09923-74511: Bearing remover set
09930-30104: Sliding shaft
$
CUSHION LEVER BEARING
• Insert the spacer into bearings and check the play when mov-
ing the spacer up and down.
• If excessive play is noted, replace the bearings with a new
one.
• Remove the dust seals
1
.
• Remove the cushion lever upper bearings with the special
tool.
%
09913-70210: Bearing installer set (25 mm)
$
• Draw out the cushion lever lower bearings with the special
tool.
%
09921-20240: Bearing remover set (20 mm)
$
The removed bearings must be replaced with new
ones.
The removed bearings must be replaced with new
ones.
The removed bearings must be replaced with new
ones.